Product added to cart
Diamond Finger Bits for Marble
- 141234Bas Relief Milling Bit radius 3Cutter for bas-reliefs radius 3 mm. drilled for internal water passage with 1/2 gas thread. The cutter for hard metal bas-reliefs is used with numerical control...In stock
- 13123Bas-Relief milling bit radius 2.5Milling Bit for bas-reliefs in metal Radius 2.5 1/2 gas with water passage to create sculptures on marble with numerical control machines.......In stock
- 141234Bas-reliefs Widia Milling Cutter 5*30Widia milling cutter for bas-reliefs 5*30 for making sculptures on marble, stone or travertine with CNC machines......In stock
- Bit for Pantograph Incimar type 15 at 115 degreeBits in widia for writing at 115 degrees are used to make engravings or epigraphs of letters or for bas-relief finishes on marble, stone or gra...In stock
- Bit for Pantograph Incimar type 15 at 90 degreebits widia for writing at 90 degrees are used to make engravings or epigraphs of letters or for bas-relief finishes on marble, stone or granite.......In stock
- Bits for Pantograph Incimar type 15 to 60 degreeBit in widia for writing at 60 degrees are used to make incisions or epigraphs of letters or for finishes of bas-reliefs on marble, stone or granite.......Out of stock
- 13123Carbide Engraving Cutters 30° Round Head DrilledCarbide Pantograph Cutter 30 degrees, drilled with a round head, radiused for creating engravings, letters, or tombstones in marble, stone, travertine, or grani...In stock
- 141234CNC Brazed Diamond Stone Router Bit diameter 10x20 mm Round HeadDiamond Router Bit for Pantographs and CNCIn stock
- Conical Bit with round head Incimar 35 degree in widiaIncimar bit 35 degree conical with round head for Incimar router or for numerical control machines for writing letters or for finishing bas-reliefs on marble, s...In stock
- Contoured Bit Incimar type 15Contoured bit for writing Type 15 Incimar is a Widia tool with rounded head to perform boulders or rebounds on marble and granite.......In stock
- Contoured Bit Incimar type 20Contoured bit cutter for pantograph in Widia with rounded head for Engraving. Used for Pantographs or for CNC machines for finishing on marble and granite.......In stock
- Contoured Bit Incimar type 20Contoured bit for writing Type 20 Incimar is a Widia tool with flat head to perform boulders or rebounds on marble and granite.......In stock
- Contoured Bit Incimar type 20 at 115 degreeWidia bits for writing at 115-degree are used to make engravings or epigraphs of letters or for bas-relief finishes on marble, stone or granite.......In stock
- Contoured Cutter for Pantograph Incimar type 10Incimar Contoured bits for alphabets or frames for marble, stone. The use of bit for pantographs is done by CNC machines or Incimar pantographs.
Widia mil...In stock - Countered Cutter for Pantograph INCIMAR type 15Incimar cutters radiused to engrave letters, frames on marble, granite, stone. Pantograph tips are used with CNC machines or with the Incimar pantograph.......In stock
- Countered Cutter for Pantograph INCIMAR type 15-mm.30Incimar cutters radiused to engrave letters, frames on marble, granite, stone. Pantograph tips are used with CNC machines or with the Incimar pantograph.......In stock
- Diamar finishing end mill 16*50Diamar fine grain electroplated end mill for finishing after cutting marble, stone, travertine, botticino. ......In stock
- Diamond Cutting Head for Incremental Cutting 32*25Diamond Cutting Head for incremental cutting, 32*25 mm, electroplated diamond with 1/2 connection for step cutting on marble, travertine, stone, and limestone.....In stock
- Diamond Finger Bit HYDRODiamond figer bit HYDRO Att. 1/2 Gas. Diamond finger bit Adi tools Thiene for cutting, contouring granite, quartz, engineered stone.......In stock
- Diamond Milling Cutter for incremental cutting 32*35Diamond milling cutter for incremental cutting 32*35 with M16 attachment to perform step cutting on marble, stone and travertine with the CNC machine......In stock
- Diamond tools for Cncfinger bit and stubbing wheel 85*20 3+3 for cutting and excavating solid marble, stone and travertine.......In stock
- Electroplated diamond bur 16*40 for honing DiamarDiamar electroplated diamond cutter for CNC machines in medium grit for smoothing after cutting. ......In stock
- Electroplated finger bit by DiamarDiamar electroplated finger bit for cutting or contouring marble with numerical control machines.......In stock
- 13123Electroplated finger bits 8x35 with flat headThe Electroplated finger bit with flat head 8*35 is used with numerical control machines for cutting, shaping, roughing marble, stone, travertine.
...In stock - Electroplated finger bits with flat headThe Electroplated finger bit with flat head 10*35 is used with numerical control machines for cutting, shaping, roughing marble, stone, travertine.
...In stock - 141234Electroplated finger bits with round headThe Electroplated finger bit 10 * 35 with a round shaped head is mainly used with numerical control machines for cutting, shaping, contouring and finishin...In stock
- 13123Electroplated Routers for Marblefor CNC machines is a diamond Router for cutting or contouring of marble and the travertine stone.......In stock
- Flat Cutter for Pantograph Incimar type 10Widia cutter Pantograph flat edge used with Pantografi Incimar or with CNC machines to carry out downs on marble
......In stock - Offer Electroplated Finger Bits 16 * 50Diamar electroplated finger bit for marble with 1/2 Gas connection 16*50 made in Italy......In stock
- Round end Cutter in Widia for pantograph Incimar type 10Widia cutter Incimar rounded head type 10. The widia milling cutter with rounded head performs cracking or falling on marble and granite.......In stock
- Router bit for pantograph Incimar type 20 at 90 degreeWidia tips for 90 degree writing are used to make engravings or epigraphs of letters or for bas-relief finishes on marble, stone or granite.
The Incimar router...In stock - Router Bit INCIMAR in Widia for writing type 10 60 degreeWidia router bit for writing at 60 degre for engravings or epigraphs of letters on marble, stone or granite. The widia bit is used both with the...In stock
- Signmaking Engraving Router Bit radiused INCIMAR Type 10Signmaking Engraving Router Bit radiused is aWidia tool with rounded head to perform boulders or rebounds on marble and granite.......In stock
- Tungsten carbide cutterwith carbide cutting edge for marble, stone and travertine sculpting with CNC machines.......In stock
Diamond Finger Bits for Marble, Stone and Travertine
Diamond finger bits for marble is an essential tool for processing marble and natural stones with computer numerical control (CNC) machines. The electroplated finger bit is designed to cut, contour, and remove material with precision. Diamond finger bits are equipped with internal holes that allow the passage of water, facilitating cooling and lubrication during processing, thus increasing the durability and efficiency of the bit. These diamond bits have a 1/2 gas attachment for easy and secure application to the workstation.
Finger Bit Features:
Electrolytic diamond finger bits are used for cutting and processing materials such as marble, travertine, and stone. Thanks to the diamond base, these bits can perform both lateral diamond cutting and undercutting with the head, as well as create slots and make non-through holes. The electroplating technology, namely the galvanic bath used in the production of these bits, ensures greater resistance and durability of the tool.
Advantages of Electrolytic Finger Bits:
Electrolytic marble finger bits are made with quality diamonds, ensuring fast, precise work and long tool life. These diamond bits are ideal for water-based processing and allow for cutting complex shapes and curves, holes, and specific shapes with great accuracy.
Materials:
- Marble
- Travertine
- Stone
Technical Specifications:
- Available Dimensions: ranging from 6x20 mm to 25x180 mm.
- Attachment: 1/2 gas compatible with CNC machines.
- Diameter Selection:
The choice of diameter for the finger bit is important to achieve the desired results.
Here are some guidelines for selection:
- 6 mm Diameter: ideal for engraving and inlay work, used with shallow depth in the Z-axis. It is recommended to make the cut in passes to avoid breakage.
- 10 mm Diameter: for roughing, material removal, and precise slotting.
- 16 mm Diameter: suitable for slab cutting, creating curves, and special shapes.
- Larger diameters (20 mm and above): used for processing thick pieces, where greater cutting depth is required.