Tenax Domo 10 A+B Extra Strong White Epoxy Mastic Lt. 1+1 Kit for Marble, Granite & Stone

Tenax Domo 10 A+B Extra Strong White Epoxy Mastic Lt. 1+1 Kit for Marble, Granite & Stone

Tenax DOMO 10 is an ultra-resistant two-part epoxy mastic, consisting of Part A (1 kg) and Part B (1 kg). Its formulation is specifically designed for the structural bonding of marble, stone, granite, and ceramics. Thanks to its solid consistency and the premium quality of the epoxy resin used, this white mastic stands out for its exceptional bonding strength and superior mechanical resistance, ensuring flawless results even outdoors and in challenging environmental conditions. Its nature as an extra-strong epoxy resin makes it ideal for permanent repairs and mixed bonding on different substrates.

• Metal-stone;
• ceramic-stone;
• stone-glass;
• concrete-stones;
• concrete-glass;
• cement-metal;
• stone composite panels;
• stone-wood or laminated wood panels.

Under normal use and work conditions, the product well preserved between 18-25 ° C away from heat, moisture and direct sunlight is guaranteed for 2 years. Warning: The Glue and catalyst are chemical products. Before use, please read the safety data sheets and safety instructions on the tins / drums.

Technical data

• Viscosity Part A cps 25 ° C: thixotropic paste
• Part B Viscosity cps 25 ° C: thixotropic paste
• Appearance Part A: beige paste / Part B Appearance: beige paste
• mix ratio by weight or volume: 100 + 100 = 200 tot
• of mass Gel time 25 ° C: about 50-60 min.
• of touch dry time at 25 ° C with 50% relative humidity: about 2h30

Application

The resin and hardener should be stored in the original containers. In automatic dosing systems, it should be avoided contact with metal parts of brass and similar alloys copper that can rust. Use plastic resistant to corrosive liquids, never use PVC. Take the two quantities containers necessary WEIGHT OR VOLUME, the two components A and B in the ratio 1: 1. Mix energetically and use. While mixing, use clean tools. If necessary, add colours and pigments. Make sure that the material on which it will be applied the glue is completely dry and clean. In the case of automatic dispensers, we recommend checking daily dose. For cleaning of equipment use non-fat solvents, such as acetone and butyl acetate. Always use protective gloves and goggles during use (read the safety data sheet). Tightly close the container after use, avoid prolonged contact with the air.