Tenax Eliox A+B Epoxy Mastic Extra Clear

Tenax Eliox A+B Epoxy Mastic Extra Clear

Eliox A+B is an extra clear epoxy mastic. Eliox extra clear epoxy glue has low yellowing and can be used both indoors and outdoors. It is certified for food contact and complies with Commission Regulation (EC) N 1895/2005. Eliox has a strong grip and is suitable for grouting, gluing and laminating marble, stone, granite, engineering stone and porcelain stoneware.

Materials

Marble - Granite - Quartz - Ceramics - Stoneware - Engineering Stone

Advantages

• Excellent adhesion
• Very low shrinkage after hardening
• Easy to colour
• Soft and easy to use
• Very shiny and easily polishable
• Non-sagging
• Temperature resistant
• Approved for food contact

Use

• Mastic and hardener must be stored in original containers.
• Avoid contact with metal parts made of copper, brass and similar alloys which may rust.
• Use plastics resistant to corrosive liquids, never use PVC.
• Take from the two containers the necessary quantities, IN WEIGHT, of the two components A and B, in the ratio indicated.
• Mix vigorously and proceed to use.
• Use clean tools when mixing. Add colours and pigments if necessary.
• Make sure that the material to which the glue will be applied is completely dry and clean.
• Clean the equipment with non-greasy solvents such as acetone and butyl acetate.

Technical data sheet

• Density part A / part B at 25°C gr/cm³: 1.1 / 1.0
• Hardener dosage: 100+50
• Gel time in bulk 25°C: 10-15 min.
• Out of touch time at 25°C: Approx. 3h - 3h 30min
• Minimum reaction temperature: 10°C
• Minimum use temperature after curing: -25°C
• Maximum use temperature after hardening: 60°C
• Workability time at 25°C (minimum time for polishing and cutting): 24h
• Adhesion on marble after 8h: 11 MPa
• Adhesion on marble after 24h: 12 MPa
• Adhesion on quartz after 8h: 13 MPa
• Adhesion on quartz after 24h: 13 MPa
• Adhesion on ceramic after 8h: 16 MPa
• Adhesion on ceramic after 24h: 17 MPa