Tenax Glaxs Original Transparent

Tenax Glaxs Original Transparent Pack Ml.215

Tenax Original Glaxs transparent is a high adhesion system for bonding ceramics, porcelain stoneware, quartz and natural stone. Glaxs Original is a two-component adhesive in cartridge with 2+1 ratio, two parts of resin and one part of hardener, the mixer performs the correct proportioning of the product very easily. Glaxs Original can be used for both interior and exterior bonding.

Benefits

• VOC-free
• Excellent adhesion
• Excellent colour stability in sunlight
• Glossy, brilliant and easy to polish
• Indoor and outdoor use
• Pre-dosed for easy dispensing
• Comes with 4 mixers for mixing
• Two ml.215 cartridges

Instructions for use

• The surfaces must be clean, dry and free of dust and grease.
• In the case of polished and/or smooth surfaces, we recommend sanding the substrate before gluing.
• Remove the threaded end and pull out the cap.
• Attach the mixer to the cartridge with the threaded end.
• Before gluing, it is recommended to extrude the product, about 5 cm.
• After use, clean the nozzle, close the cartridge and discard the mixer.
• Use guns with 2+1 ratio

Data sheet

• Mixing ratio: 2+1
• Format: 215 ml
• Colour: Transparent
• Gel time (in mass at 25°C): 3-5 min
• Handling time: 15-20 min
• Workability time (25°C): 45-60 min