Bellinzoni Porosil Protective Reviver Anti Stain

Bellinzoni Porosil Protective Reviver Anti Stain Lt.1

Bellinzoni Porosil is a solvent-based stain protective designed to revitalize and preserve the beauty of granite, polished marble, terrazzo, and seeded floors. Thanks to its advanced formulation, this product provides a revitalizing, water-repellent, and antistatic effect. When applied to glossy surfaces, Porosil not only conceals potential defects such as opacity, spider webs, micro-cracks, and natural imperfections but also tones and evens out the coloration of the treated marble. One of the distinctive features of Porosil is its ability to protect materials from generic surface stains and provide antistatic properties. It is important to emphasize that this product does not create plastic effects or surface films, ensuring a natural appearance to the treated surface. Its versatility allows for application on external stone materials as it is resistant to UV rays, rain, mold, and adverse weather conditions.

Materials:

Marble - Natural stone - Granite - Grit floors

Instructions for use:

The application surface must be clean and dry. Any mould and encrustations on the surface must be removed.

How it is automatically applied to slabs, tiles or strips:

Use POROSIL with a dosing machine (waxing type) by dropping drops of product or by spraying onto the slabs and then proceed to distribute the product evenly using the heads equipped with distributing and then polishing brushes. At the end of the line, the product is dry and then the slabs can be stored in the traditional vertical position.

How to apply by hand:

Spread the product evenly using a white cotton cloth; after 30-60 seconds 'pull' the product with a clean, dry cloth. The product can be reworked and moved immediately after application without compromising the final result. Consolidation of the material occurs 4 - 5 days after treatment.

How to apply on the floor:

Spread the product evenly with a white cotton cloth, after a few seconds proceed with polishing with a clean cloth or polishing machine equipped with a wool and felt cap. It is advisable to treat the floor for lines of about 50 cm. for a length of 200 cm. in order to make the treatment more comfortable.

Product yield:

One litre of product can be used to treat 30/40 m2