Bush Hammering Granite Hammer 4 Lupato

Bush Hammering Granite Hammer 4 Lupato

The Hammer 4 granite bushhammering plate from Lupato meccanica is a plate for bushhammering slabs, granite strips or floors already in place in medium or fine grain. The Hammer granite bush-hammering plate has a diameter of 320 mm. It is made with 4 bush-hammering rollers with 20 points to obtain medium grain, 30 points fine grain, it uses the compensation system that compensates the wear of the points, so that the points are always sharp until they are completely worn. It can be used with manual or automatic marble polishing machines or with floor polishing machines to bush granite, abrasive stones or sandstone.

The choice of tool:

• 20-point roller: Medium grain.
• 30-point roller: Fine grain.

Technical data sheet:

• 4 bush-hammering rollers.
• Hourly output: 10 m2/h with medium bush-hammering.
• Speed of rotation: 1,400 rpm max.
• Tool diameter: 320 mm.
• Marble polisher, manual floor polisher.
• Workable material: Granite - Sandstone - Abrasive stone.