Bushhammering Granite Hammer 6 by Lupato

Bushhammering Granite Hammer 6 by Lupato

Bushhammering Plate Granite Hammer 6 for bush-hammering granite and sandstone. The Hammer 6 bush hammer plate is 320 mm diameter and consists of 6 bush hammer rollers for medium grain bush hammering with 20 prongs, fine grain bush hammering with 30 prongs. The Hammer 6 tool can be used with either a manual or automatic marble polishing machine to bush-bush granite or abrasive stone slabs or strips, it can also be applied to floor polishing machines to bush-bush floors already in place. The rollers that make up the Hammer plate adopt the compensation system that compensates the wear of the tips with the wear of the roller, so the tips are always sharp and protruding until the bush hammer roller is completely worn, without the need for sharpening.

Technical data sheet:

• Hourly output: 18 m2/h with medium bush hammering.
• Rotational speed: 1,400 rpm max.
• Tool diameter: 320 mm.
• Machining with fixed machines on the plane.
• Material: Granite - Sandstone - Serena Stone.
• Rollers: 6
• Grit: Medium with 20 points - Fine with 30 points.