Engraving Bit in Widia 90° for Marble

Engraving Bit in Widia 90° for Marble by F.lli Giorgi

90-degree Carbide Milling Cutter Drilled for marble, used for engraving or lettering on marble with a pantograph or CNC machines. The engraving tips are made of carbide, a tungsten and cobalt alloy that is extremely hard and wear-resistant, with a 10 mm diameter steel shank. Giorgi's 90-degree carbide milling cutters are drilled to allow water flow for cooling the tip during operation and removing debris from the work area.

The advantages of using Giorgi type 10 90 degree drilled pantograph cutters:

• Achieve high quality engravings with sharp, precise edges.
• Use a wear-resistant material, which guarantees a long tool life.
• Cool the tool during machining, to avoid overheating.
• Avoid the accumulation of debris, which can damage the tool and the work in progress.

Technical data:

• Spindle speed: 8000/10000 rpm.
• Feed speed: 150/250 mm./min.
• Z-axis depth: 3 mm. max.
• Shank: steel 10 mm. diameter