Eureka Granite Polishing gel for granite

Eureka Granite Polishing Gel Bellinzoni Lt.1

Bellinzoni's Eureka Granite Polishing Gel is a polishing gel for granite. Eureka gel restores shine and revives colour to granite that has become dulled by wear and tear.

Chemical properties:
Appearance: Gel
Colour: Transparent opalescent
Odour: Odourless
Store at 20°C away from heat, humidity, sunlight: 24 months in original packaging

How to use:

The surface must be dry and clean.
Wash the floor thoroughly with a single-brush cleaner and appropriate disc, using Bellinzoni Ultra Stripper detergent to remove wax residues or other treatments.
Place a small amount (about 30 grams) of "Eureka Granite" directly on the floor, the single-disc machine must be equipped with a natural bristle disc or white felt, moisten slightly.
Use single-brush with 150-400 rpm on approx. 1-2 m2 of floor.
Nebulise or pour water in case the gel dries out too quickly while working.
After distributing the product, work the surface until the gel is dry and the desired gloss is obtained.
When finished, wash the floor with water and Ultra Stripper detergent to remove residual product and to neutralise residual acidity.

Polish tables, bathroom or kitchen tops, bar counters:

Wash the surface, remove dirt or any wax residue with B-Refresh Top from Bellinzoni.
The surface must be clean and dry.
Put a small amount of product (10-15 g) on the surface to be polished and moisten with a few drops of water.
Use the Eurek PAd sponge felt on a polishing machine with adjustable speed between 800 - 1500 rpm. Work the surface until completely dry.
Clean any residue with water and neutral detergent B-Refresh Top.

Product yield:
Approximately 30/35 m2 can be treated with one litre of product.