Hydrex Tenax Water and oil proof anti stain

Hydrex - Water and oil proof anti-stain  - Tenax

HYDREX is an anti-stain (water and oil proof) suggested for polished marbles like: Carrara, Thassos, Trani, Botticino, Marfill and similar stone. Can be used for external use. Does not change the colour of the stone. HYDREX operates on the surface of materials, it stops microporosities so that prevents liquids from penetrating the material but it remains permeable to vapours letting materials breath and keeping their characteristics unchanged

Instructions for use

The product must be evenly applied on dry and clean materials. The presence of water, dust or dirty matter may influence the result regarding the uniformity of the surface. We suggest to spread the product using a brush, sponge, cloth or through a gun spray. Use the right quantity that the material naturally can absorb. Then, after few seconds, clean (buff) the surfaces by a cleaned cloth. The excess may create a superficial sticky films, so the excess must be removed immediately after the application. We suggest to repeat this treatment after 10-15 minutes from the first application. The effect of anti stain will be achieved after 24 hours from the treatment. In case of floor application, do not walk on the surface before.

Technical data

• Density at 25°C gr/ml: 0,80
• Aspect: liquid
• Standard Colour: transparent/opalescent
• Quantity to be used: normally with 1 litre is possible to treat 20-30 square meters of stone. The consume depends a lot from the porosity of the material.