Mastic Sprint Iridium for Quartz Gres

Matice Sprint IRIDIUM for Quartz Porcelain Stoneware Ml.750

Sprint Iridium mastic for bonding quartz, porcelain stoneware. Epoxy-acrylate mastic putty for gluing, assembling and repairing marble, quartz, ceramic and porcelain stoneware. Thanks to the use of epoxy-acrylate resins, the mechanical and chemical resistance of Iridium mastic is far superior to traditional marble mastic. Iridium mastic is colourable with mastic pigments, fast setting and quick drying.

Features:

• Available colours: Transparent - White - Black
• Type: Vertical thixotropic paste
• Quantity: 750 Ml.
• Curing time: hardens at 23 °C 20 - in 50 minutes.
• It is used for : Permanent bonding even in difficult situations.
• Materials: Marble - Stone - Porcelain stoneware - Quartz and Ceramics.

Recommendations: Hardener percentages higher than 3% may lead to yellowing of the product.
Hardener percentages below 1% and very low temperatures can lengthen the curing time.
An already thickened or partially gelled adhesive should not be used.
Adhesive thickness should be kept as low as possible to limit shrinkage and exothermic heating of the product during curing.
Excessive exposure to sunlight may lead to yellowing of the adhesive.
Once cured, the adhesive cannot be removed with solvents but only mechanically.

Instructions for use:

• The mastic must be applied on clean, dry and rough surfaces.
• The mastic can be coloured with SPRINT colouring pastes for mastic.
• The amount of hardener must be between 1% and 3%.
• The application time varies between 5 and 15 minutes depending on the temperature and the percentage of hardener inserted.
• Tools must be cleaned with acetone or nitro thinner.