Proseal Oil Proof and water proof for granite Tenax

Proseal Oil Proof and water proof for granite - Tenax

PROSEAL is suitable for the superficial protection of granite both for indoor and outdoor. We recommend PROSEAL on quarzitic stones and materials with different percentage of silicate and carbonate. It works very well on polished, honed, sandblast, and flamed surfaces. PROSEAL operates in the micro-porosities of materials giving a protection against stain. PROSEAL does not create superficial films, and let the material transpires. After the application a light increase of colour can be gotten that depends by the type of stone where the product is applied. Good the resistance to the outside conditions.

Instructions for use

The product must be evenly applied on dry and clean materials. The presence of water, dust or dirty matter may influence the result regarding the uniformity of the surface. We suggest to spread the product using a brush, sponge, cloth or through a gun spray. Use the right quantity that the material naturally can absorb. Then, after few seconds, clean (buff) the surfaces by a cleaned cloth. The excess may create a superficial sticky films, so the excess must be removed immediately after the application. We suggest to repeat this treatment after 10-15 minutes from the first application. The effect of anti stain will be achieved after 24 hours from the treatment. In case of floor application, do not walk on the surface before.

Technical data

• Density at 25°C gr/ml: 0,80
• Aspect: liquid
• Standard Colour: transparent/opalescent
• QUANTITY TO BE USED: Normally with 1 litre is possible to treat 20-30 square meters of stone. The consume depends a lot from the porosity of the material.